Welcome guest, Login
- Flight Simulators
- Helicopters and Parts
- Multi-Rotors and Parts
- Redcat Racing
- RC Car Supplies
- Tiger Motors and ESCs
- Camera Mounts and Gimbals
- Flybarless Systems
- Lynx Heli Upgrades
- Transmitters & Receivers
- Chargers and Power Supplies
- Anderson Powerpoles
- Servos and Parts
- Blades and Paddles
- Night Flying
- ESC's / Speed Controllers
- Motors and Tail Gyros
- Oversky Motors and ESCs
- Tools and Supplies
- 130X Upgrades
- mCPX Upgrades
- Xtreme Hop-Ups and Accessories
Lynx Heli Innovations has redesigned the standard 300 X plastic main grip, using aluminum alloy.
During our intensive test we discovery that standard radial bearing size was easy damaged in case of intensive fly condition or after a crash.
We decided to replace the standard radial bearing size and offer a stronger system with larger outside diameter Radial Bearing and Thrust Bearing.
Lynx 300X Main Grip are fully compatible with standard 300X head parts, but are stronger not only because are made by Aluminum, but in particular because the resized bearing system.
We also decided to move the position of the thrust bearing, originally placed on the outer side, faced to the locking spindle screw.
We placed the thrust bearing in the inner side to increase the spindle shaft and radial bearing support and dramatically reduce play.
This bearing support system is normally used in bigger RC-Heli main grip design and Lynx introduce it on 300X because really does improvement, and the proposal is made a main grip system more precise and smooth in rotation under load.
Helicopter upgrades can be a trap – often they look nice but do little for function, and only add weight.
We spent hours optimizing the design to achieve the required strength with a final weight beyond compromise. We are pilots, and we demand a light and performing helicopter.
The details and design of these blade grips add top performance in your helicopter.
Strength, durability, accurate CNC tolerances, finish, and most important lightweight.
Lynx 300X Main Grips increase flight precision, flight after flight, and are a direct replacement for the standard 300 X parts.
Main grip material: Aluminum 7075-T6 – clear anodized finish
Bearing material: SST – ABEC5
Hardware: Steel 12.9 Class - DIN 912
2 x 300 X – CNC Main Grips - Silver Color
4 x Radial bearing 3x8w2.5
2 x Thrust Bearing 3x8w3.5
2 x Hex cap screw M2x14
2 x Self Lock Nut M2
6 x Fine Adjustment Shims 3 x 4.5 w 0.15 (refer to user manual for setting information)
- Tail servo support material: Aluminum 7075-T6 – Silver anodized finish.
- Screw material: Carbon steel 12.9 class
- Assembled weight (including hardware): 3.75g
2 x CNC 300 X – Mini Protos tail servo mount
2 x M2x8 Hex Cup Screw
4 x M2x6 Hex Cup Screw